Microturbine Technology - Cogeneration and Distributed Power

Copeland Compressor - $10,000

Tue, 10 Apr 2012 23:56:00 -0500

New in crate. Surplus. While supplies last. Located near Seattle, Washington.
Unit: Copeland Gas Compressor Model: Runs 2 C30’s or 1 C60
Sold As: New/Surplus Available Number: Call for supply
Copeland Gas Compressor
Examples of scroll compressors that are being custom mounted on a skid for landfill gas usage can be seen at the link below. Note: One of these Copeland compressors can run at least two C30’s.

Service @ 8,000 hrs
• Top up oil level
• Clean air intake/exhaust screens
• Replace inlet filter
• Replace oil separator
Inlet Gas Requirements
Clean,Dry Pipeline Quality
< 45 ppm H2S
< 150 ppm H2O
< 2.5% CO2
Dimensions
H:1178 mm / 42”
W:601 mm / 24”
L: 1072 mm / 46”
Weight
250 kg / 550 lb
Typical Sound Level
55 dBA @ 10 m

2 USED
1 New / Surplus
CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

Capstone C30 - New Surplus - In Original Crate

Tue, 10 Apr 2012 19:01:47 -0500

Model C30 Serial Number 003508. Built 2005. Demo hours only. Still in the original Capstone crate. High pressure natural gas fueled, NEMA3R industrial cabinet, 73 hours approx.
Price ex-works. Crating charge for shipping not included.
Photos

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

Capstone C65 - New - 9 Available

Wed, 4 Apr 2012 16:08:26 -0500

Capstone C65 - 9 units available for immediate delivery. These are new units, tested and working. Units are currently stored in a warehouse.

Capstone ICHP C65s. The units are model number 65R-BG4-SUOO, all have zero operational hours.

65R-BG4-SUOO

Model C65 Recuperated
B = Biogas (landfill gas or wastewater treatment gas)
G = Grid connect
4 = 400-480 50 hz or 60 hz selectable
U = US and Canadian UL listings

Runs on natural gas, landfill gas, or digester gas.

Fuel Specifics:

http://www.globalmicroturbine.com/pdf/fuelspecs.pdf

Landfill/ Digester Gas (Medium Btu) Calorific Value 13.04 to 28.32 MJ/m3 (350 to 760 btu/cu/ft)
Specific Gravity: 0.80 to 1.10
Wobble Index: 12.45 to 31.65 MJ/m3 (334 to 849) btu/cu/ft
Mixture consisting mainly of methane, carbon dioxide, and nitrogen, with trace quantities of higher hydrocarbons, plus hydrogen sulfide (H2S) in quantities >5 ppm V, but <70,000 ppm V.

Publications:

http://www.globalmicroturbine.com/pdf/LFG/410002G_Fuel_Requirements_TR1.pdf

http://www.globalmicroturbine.com/pdf/LFG/410027_Grid_Connect.pdf

http://www.globalmicroturbine.com/pdf/LFG/CR65_CR65_ICHP_Renewable_Fuels.pdf

http://www.globalmicroturbine.com/pdf/LFG/400017A_C65_Users_Manual_V5XX.pdf

http://www.globalmicroturbine.com/pdf/LFG/410048B_C65_Performance_TR.pdf

When Sold as a System (Description):

Information on Entire Skid Mounted System - 585 kw/hr

Gas handling system is designed to clean, dry, and compress up to 220 scfm of biogas. The gas will be consumed by nine CR65 Capstone Micro Turbine generators. The skid is designed for outdoor operation in a Class I, Division 1 area. The control panel is designed for outdoor operation in an unclassified area, and the glycol chiller is designed for outdoor operation in an unclassified area.

The system is comprised of several parts including: the gas compression skid which pressurizes the gas, removes moisture, and regulates discharge pressure; the siloxane filtration system which removes siloxane compounds; the suction and discharge scrubbers that filter out condensate and media; the chiller which supplies cold glycol for use by the gas compression skid; and, the control system which acts to keep all other parts of the system working in harmony.

The gas conditioning system control panel is equipped with a Programmable Logic Controller (PLC) that receives data from transmitters, thermocouples, and digital inputs. The PLC maintains control of the process gas operating pressure, the running efficiency of the skid and protects the equipment during process interrupts. The control panel includes auxiliary terminals for a remote run command input and a customer fault input. Dry contact outputs are included for skid run status and skid fault status. A display screen is provided to monitor the gas skid and turbine system, and faults status. It also provides an interface to adjusted skid pressure set-points, and turbine controls.

Gas is supplied to the skid through a 4” flange fitting on the skid inlet. Upon entering the skid, biogas first passes through an inlet heat exchanger where the gas is cooled to 70 ̊F using chilled glycol. The glycol is cooled in a remote chiller and piped to the skid. The cold gas now enters the suction scrubber, where a portion of the moisture entrained in the gas is removed. After exiting the suction scrubber, the gas is compressed to approximately 100 psig using a rotary screw compressor. Gas leaves the compressor at about 200 ̊F entrained with oil and flows through an oil separator and coalescing filter where the oil is separated from the gas.

Next, the compressed gas is cooled in a gas/gas Flat Plate heat exchanger. Followed by a gas to chilled glycol heat exchanger. This heat exchanger utilizes the same glycol loop used in the first cooling stage. After chilling, the gas goes through a second stage of condensate removal in a moisture separating vessel. Next, the process gas flows back through the gas/gas heat exchanger where it is reheated to 80oF. This process ensures that the final dew point of the gas is below 45 ̊F, and the final relative humidity is about 23%.

Skid discharge pressure is maintained by a back pressure valve which adjusts to maintain operating pressure set-point by re-circulating some of the discharge gas back to the inlet of the compressor.

Process gas leaves the compression skid, and travels through a series of siloxane filtration vessels, before it is sent to the turbines. The turbine header distributes gas to the turbines through fuel kits. Every fuel kit contains a particulate filter and a pressure regulator which reduces gas pressure to approximately 75 psi. As the turbines consume the biogas, they produce 480V, 3 PH, 60 Hz power.

Price ex-works. Crating charge for shipping not included.
CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

ITmini Turbine - Direct Drive 1-3 kW DC Generator

Tue, 3 Apr 2012 20:02:26 -0500

The Infinity Turbine model ITmini is a waste heat to electricity turbine, which operates on a low boiling point refrigerant that can take low grade waste heat and make DC power. Unit has a integrated magnetic coupling which can be used to direct drive any rotary device (5,000-15,000 rpm). The nature of the magnetic coupling allows you to put a copper coil on the outside of the back block to utilize the spinning interior lead magnetic disc to generator power through the exterior coil. The magnetic follower disc has a 10 mm shaft bore.

Unit requires a flow of hot water or liquid 1-5 gpm (80-140 C temperature) to drive a 1-3 kW DC generator.

For more information, please see:

http://www.infinityturbine.com

IR70 - Ingersoll Rand 70 kW Grid Connect CHP

Fri, 30 Mar 2012 18:59:08 -0500

Ingersoll-Rand PowerWorks 70 Series Microturbine driven generator set.
Built 2002. 5,700 hours. Natural gas fueled, gas compressor on board. This is a grid connect, NEMA3R enclosed unit. Under ISO conditions the unit delivers 70kWe, 480 volt AC, 60 Hz, 3 Phase power. Maximum power output is 98 kWe. This package also includes the hot water waste heat recovery module. Serial #PW00208D0102. Max 30 gpm hot water. IR_MT70_120LT_2006.pdf
Price ex-works. Crating charge for shipping not included.

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

Capstone Publications and Surplus Software

Fri, 6 Jan 2012 21:11:55 -0600

Capstone Publications and Software - Surplus
Includes the C60, C30, Applications Guide, Engine Software, Remote Monitoring Software, Unifin Microgen Heat Exchanger, Service Bulletins and other publications - see full list below.
Electronic format (.pdf) available on disc, $5,000. Surplus.

Payments via PayPal and VISA accepted.

See a partial list of pubs here - photos

Waste Heat Publications - purchased in hard copy format from the U.S. Gov and scanned into .pdf format:

ORC Publications now online:

http://www.infinityturbine.com/publications/All_Publications/All_Publications.html

Here is the list of Capstone surplus pubs:

1. Application Guide - Power.pdf
1. Application Overview - Power March2002.pdf
1. C60(1) Dual-Mode Power
1. Capstone PowerServer.pdf
1. Case Study - Biogas, San Elijo.pdf
1. Model 330 Electrical Reference 410000rA.pdf
1. Product Catalog March2002.pdf
1. Typical Installation Project Schedule.pdf
2. Product Specification in Word 460000-001.doc
2. Application Guide - Direct Exhaust.pdf
2. Application Overview - CHP March2002.pdf
2. C60(1) Grid-Connect with Heat Recovery
2. Case Study - Peak Shaving Power at an Office Bldg.pdf
2. Model C60 Electrical Reference 410001rA.pdf
2. Model C60 Installation & Start-Up.pdf
2. Other Capstone Options.pdf
2. Product Specification 460001A.pdf
2.5 Model C60 Performance Reference Guide Disclaimer.pdf
3. Application Guide - Hot Water.pdf
3. Application Overview - Biogas March2002.pdf
3. C60(1) Oil and Gas
3. Case Study - Combined Heat and Power.pdf
3. Copeland Gas Booster SpecSheet.pdf
3. MicroTurbine Certifications List May2002.pdf
3. Model C60 Performance Reference Guide.pdf
3. Model C60 System Operation.pdf
4. Application Guide - Biogas.pdf
4. Application Overview - Oil & Gas March2002.PDF
4. C60(10) Grid-Connect with PowerServer
4. Case Study - Coal Bed Methane.pdf
4. Model 330 & C60 Fuel Reference Guide.pdf
4. Model 330 Install & StartUp.pdf
4. Unifin MicoGen2.pdf
4a. C30hp datasheet.pdf
4a. Unifin mg1c1.PDF
4b. C30lp datasheet.pdf
4b. Unifin mg2c1a.PDF
4c. C30bio datasheet.pdf
4c. Unifin mg2c2b.PDF
4d. C30liq datasheet.pdf
4d. Unifin mg4c1a.PDF
4e. C60 datasheet.pdf
4e. Unifin mg4c2a.PDF
5. ABB Alpha Plus Meter.pdf
5. C60(2) Grid-Connect with Heat Recovery
5. Case Study - American Oil, Gas Article on CBM.pdf
5. Model 330 System Operation.pdf
6. 330(1) Biogas
6. Case Study - Oil & Gas, SPE Article.pdf
6. Warranty_Standard.pdf
7. Model 330 and C60 Outline drawings
7. Warranty_Extnd_1_Yr.pdf
8. Warranty_Extnd_2_yr.pdf
9. Commissioning Checklist 512903-001rA.pdf
497-0377-00.dxf
410035_C60_Component_Desc.pdf
440167A_C30_GC_SARetrofit.pdf
440167A_C30_GC_SARetrofit.pdf
AEB - Comp Service Reminder.pdf
AEB - DC Power Cable Harness.pdf
AEB - FGB General Application Info.pdf
AEB - FGB Guide for Non-Pipeline Gas.pdf
AEB - Low Gas Pressure Switch Replacement.pdf
AEB - Low Gas Pressure Switch.pdf
AEB - Service Reminder Annual Maint - Pipeline Gas.pdf
Bulletins
C30_Ver_4_93.zip
C60_Ver_3_91.zip
Capstone Manuals
Capstone Software
Capstone Software.zip
Confidential - DC Power Supply Reiability Issue.pdf
Confidential - FGB HX Corrosion Safety Notice.pdf
Confidential - Service Kit for Biogas Applications.pdf
Copeland
Copeland Bulletin Index.doc
Copeland Training V1.0 2001
CRMS V4.0 Setup
CRMS V4.25 Maint Setup
CRMS V4.25 User Setup
CRMS_V4_25_User.zip
CRMSV4.25Maint Edition.zip
Drawings
FGB Outline.PDF
Index.pdf
ModelC30SoftwareV4.76.zip
ModelC60SoftwareV3.82.zip
NEWSLETTER_June04.pdf
Oil Cooling Heat Exchanger Replacement Instructions.pdf
Presentations
Presentations
Product Catalog RegistrationDoc.pdf
sb0001.pdf
sb0002.pdf
sb0003.pdf
sb0004.pdf
sb0006.pdf
sb0007.pdf
sb0008.pdf
sb0009.pdf
sb0010.pdf
sb0011.pdf
sb0012.pdf
sb0013.pdf
sb0014.pdf
sb0015.pdf
sb0016.pdf
sb0017.pdf
sb0018.pdf
sb0019.pdf
sb0020.pdf
sb0021.pdf
sb0022.pdf
sb0023.pdf
sb0024.pdf
sb0025.pdf
sb0026.pdf
sb0028.pdf
sb0029.pdf
sb0030.pdf
SB0031.pdf
SB0032.pdf
SB0033.pdf
SB0034.pdf
SB0035.pdf
SB0036.pdf
SB0037.pdf
SB0038.pdf
SB0039.pdf
SB0040.pdf
SB0041.pdf
SB0042.pdf
SB0043.pdf
SB0044.pdf
SB0046.pdf
SB0047_C60FanFailures.pdf
SB0047.pdf
SB0048.pdf
SB0049_HEV Contamination Preventative Measures.pdf
SB0050_Pressure Regulator Replacement - Model C30 Liquid Fuel.pdf
SB0051_Model C60 Software Version 3.91 Release Notes .pdf
SB0052_Model C30 Software Version 4.93 Release Notes.pdf
SB0053_C60 Silencer Improved Sealing.pdf
SB0055_Fuel Injector Replacement_C30.pdf
SB0056_SPV Version 2.14 Software Compatibility.pdf
SB0057_C60 Fan Failures.pdf
SB0058_C60 Software V3.91 Upgrade Required.pdf
SB0059_Backflow Damper Replacement.pdf
SB0061_UCB Input Signal and Ground Isolation.pdf
SB0065_CRMS V4.41 Software Release Notes.pdf
SB0066_C30 V5.01 Software Release Notes.pdf
SB0067_C30 HEV v2.09 Software Release Notes.pdf
Service
Service Bulletins
Service Bulletins
Service Connection Newsletters
ServiceConnection_Apr2003.pdf
ServiceConnection_Aug2003.pdf
ServiceConnection_Feb2003.pdf
ServiceConnection_Jan2003.pdf
ServiceConnection_July2003.pdf
ServiceConnection_June2003.pdf
ServiceConnection_Mar2003.pdf
ServiceConnection_May2003.pdf
ServiceConnection_Nov2002
ServiceConnection_Oct2003.pdf
SN0009_PM Programming of LCM & BCM CB.pdf
Tab 1 Table of Contents.pdf
Tab 1. Application Overviews
Tab 2 Table of Contents.pdf
Tab 2. Case Studies
Tab 3 Table of Contents.pdf
Tab 3. Application Guides
Tab 4 Table of Contents.pdf
Tab 4. Product Specification
Tab 5 Table of Contents.pdf
Tab 5. Technical Reference Guides
Tab 6 Table of Contents.pdf
Tab 6. Installation Drawings
Tab 7 Table of Contents.pdf
Tab 7. Installation & Operation
Tab 8 Table of Contents.pdf
Tab 8. Optional Equipment
Table of Contents.pdf
TAG&PC0502
Unifin
Unifin IOM Manual.pdf
Unifin SB Index.doc
Unifin SB1.pdf
Unifin SB2.pdf
Unifin SB3.pdf
Unifin SB4.pdf
Unifin SB5.pdf
Unifin SB6.pdf
Unifin SB7.pdf
Unifin SB8.pdf
Unifin SB9.pdf
Unifin SB10.pdf

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

Air Cooled Condenser

Wed, 4 Jan 2012 10:03:20 -0600

Carrier Model 9DK Air Cooled Condenser. Located near Seattle, Washington. May use for microturbine or ORC applications.

ITxr ORC Turbine Gen Only - Waste Heat to Power

Tue, 3 Jan 2012 10:56:18 -0600

The Infinity Turbine model ITxr is a waste heat to electricity turbine, which operates on a low boiling point refrigerant that can take low grade waste heat and make DC power.

Unit requires a flow of hot water or liquid 24-33 gpm (80-140 C temperature) to drive a 5-10 kW DC generator.
For more information, please see:

http://www.infinityturbine.com

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001 FAX (240) 525-2445  greg@globalmicroturbine.com

ITxr 5-10 kW Turbine Generator (DC Power)

Tue, 3 Jan 2012 09:56:41 -0600

Infinity Turbine ITxr Turbine Generator. Includes magnetic coupling to drive any rotary device (pump, generator). One moving part. ORC designed for refrigerants and waste heat utilization to make power.

For additional information, please visit: http://www.infinityturbine.com

Feasibility Study

Mon, 2 Jan 2012 23:55:55 -0600

If you need options on paper, Global Energy offers feasibility studies to compare equipment, options and paybacks.

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

IT50 Waste Heat Turbine - 50 kw

Mon, 2 Jan 2012 10:20:58 -0600

The Infinity Turbine model IT50 is a waste heat to electricity turbine, which operates on a low boiling point refrigerant that can take low grade waste heat and make power.

Produce up to 55 kw (gross) and 50 kw (net) output. Unit is sold with a AC Generator.

For more information, please see:

http://www.infinityturbine.com

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001 FAX (240) 525-2445  greg@globalmicroturbine.com

Capstone Microturbine - New, Surplus and Used Wanted

Sun, 1 Jan 2012 12:59:05 -0600

We're currently seeking Capstone C30's...

Global Microturbine offers used Capstone Microturbine and zero hour Capstone Microturbine units.

Please see our complete listing on our website.

Website is updated when a unit is listed or sold. If you are looking for cogeneration, LEED, heat exchangers, compressors, chillers and energy devices to save on power bills, this is the website that contains equipment which can be utilized to develop a strategy to do so.

Microgen / Unifin Heat Exchanger - Call for Pricing

Sun, 1 Jan 2012 11:12:26 -0600

Available: Model Number : Microgen

Used in working condition.

- Heat Recovery Unit For Two C60 Capstone Microturbines
- Main Power Supply 480V 3 Phase 60 Hz.
- Pump Power Supply 480V 3 Phase 60 Hz.
- Model MG-4C2-MP44-MS4-MC-200
- Date 2003
- Serial #4973-3

Also available - several Microgen Heat Exchangers for C60:

PHOTOS OF MICROGEN CLICK HERE

ONLY TWO LEFT AS OF 3/1/2010

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com

Capstone Remote Monitoring Software CRMS

Sun, 1 Jan 2012 08:44:49 -0600

Capstone Remote™ Monitoring Software (CRMS) M3X-CRMS
Capstone Remote monitoring software (CRMS) provides dispatch, control, monitoring, trending, E-mail alarming, data logging, and automated operation for the Capstone
MicroTurbine. CRMS is compatible with Windows 95, 98, NT, 2000, ME and XP and runs on standard desktop or laptop PCs. CRMS communicates with up to 100 microturbines simultaneously, either locally via serial port or remotely via modem or the optional CPC-100 Internet protocol converter. A customizable desktop displays up to 100 microturbine control panels, strip charts, trend graphs, event alarms, and automation panels.

CRMS can be used to communicate with different microturbines spread across multiple locations or a single-site Multipac (multiple microturbines operating as a unified system).

Surplus: Call for pricing.

CONTACT
Thank you for your interest in Global Energy and Global Microturbine. If you have a question, comment, suggestion, or would like to contact sales, please contact us below.
Global Energy  P.O. Box 5617 Madison, WI 53705 USA TEL: (608) 238-6001   greg@globalmicroturbine.com