Microturbine Search Engine Series
Capstone Turbine Publications search was updated real-time via Filemaker on:Capstone Turbine Publications | Return to Search List
Search Completed | Title | Battery Breaker Disconnect during Grid Isolation Model C60 MicroTurbine
Original File Name Searched: SB0040_Battery_Breaker_Disconnect_C60.pdf | Google It | Yahoo | Bing
Text | Battery Breaker Disconnect during Grid Isolation Model C60 MicroTurbine | 001
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Telephone: (818) 734-5300 • Facsimile: (818) 734-5320 • Website: www.microturbine.com
Service Bulletin SB0040
Date: From: Subject:
All Stand Alone equipped Model C60 MicroTurbine systems supplied by Capstone Turbine Corporation® operating in Grid Connect mode.
Only Capstone Authorized Service Providers (ASP) should open the MicroTurbine and other equipment connected to the MicroTurbine. The systems can include multiple sources of power. Observe and adhere to the Safety Instructions contained within the MicroTurbine manuals.
If the MicroTurbine is configured in Grid Connect mode with the battery breaker ON and the utility is disconnected (breaker is opened), the battery will remain awake resulting in battery drain. A battery pack that remains awake may be drained in a few hours, depending on the ambient temperature. If drained, the battery pack would require a Grid Connected Idle Recharge or the use of a Capstone external charger to charge the battery pack prior to operation. If left awake for an excessively long period, the battery may be drained too low to recharge, and a full battery pack replacement would be required.
In Grid Connect mode, the battery would “wake up” if: 1) the BATT START button on the display panel is pressed, 2) battery start terminals are closed through the UCB, 3) a 30-day equalization charge during load state is initiated by the system, or 4) the user initiates a manual charge via remote monitoring software or the display panel.
It is unlikely that the sequence of these conditions would occur simultaneously. However, should the battery become fully discharged, recharge using a Capstone External Battery Charger (P/N 512933-001).
Capstone Technical Support
Battery Breaker Disconnect during Grid Isolation Model C60 MicroTurbine
If you have additional questions, please contact: Capstone Technical Support
Toll Free Telephone:
(818) 407-3600 (818) 734-1080 (877) 282-8966
450004-001 Rev A (July 2002)
Page 1 of 1
This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.
Image | Battery Breaker Disconnect during Grid Isolation Model C60 MicroTurbine
|Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website|
Search Engine Contact: firstname.lastname@example.org