Microturbine Search Engine Series
Capstone Turbine Publications search was updated real-time via Filemaker on:Capstone Turbine Publications | Return to Search List
Search Completed | Title | Micro-Turbine Systems Glossary of Terms and Acronyms
Original File Name Searched: 400002D_Glossary-2.pdf | Google It | Yahoo | Bing
Text | Micro-Turbine Systems Glossary of Terms and Acronyms | 001
Capstone Turbine Corporation • 21211 Nordhoff Street • Chatsworth • CA 91311 • USA Telephone: (818) 734-5300 • Facsimile: (818) 734-5320 • Website: www.microturbine.com
Glossary of Terms and Acronyms
The following is a list of standard terms, acronyms, and definitions used at Capstone. Refer to this document for understanding the terms used in the technology, features and any documentation associated with the Capstone MicroTurbine systems.
10Base-2 (10B2) – An Ethernet standard that uses a thin coaxial cable with BNC T-connectors and a maximum data rate of 10 megabits/second. Also called Thin Ethernet, ThinWire Ethernet, and ThinNet.
10Base-T (10BT) – An Ethernet standard that uses a twisted-pair cable, RJ-45 connectors, and a. maximum data rate of 10 megabits/second.
100Base-T (100BT) – A high-speed twisted pair Ethernet (also called Fast Ethernet) that uses RJ-45 connectors and a maximum data rate of 100 megabits/second.
AC – Alternating Current.
ACFM – Actual cubic feet per minute flow at operating temperature and pressure.
ACM – Ambient Climate Module on Model C60 MicroTurbine. It contains ambient pressure reading and passes ambient temperature reading from TCIN sensor to ECM.
ADC – Analog-to-Digital-Converter.
A/D CONVERTER – See ADC.
AFR – Air Fuel Ratio. The ratio, on a mass basis, of air to fuel in the gas mixture that is burned in the combustor. This ratio will vary according to operating requirements such as load demand.
AGA – American Gas Association.
AIR INTAKE ASSEMBLY – Assembly that directs engine intake airflow into the MicroTurbine. May contain sound attenuating material to reduce high frequency noise signature; a filter is housed in the assembly to provide filtered air to the MicroTurbine generator.
ALC – Auxiliary Load Controller.
AMPERE (AMP) – The unit of measurement of the current produced in a circuit by one (1) volt acting through a resistance of one (1) ohm. The measure of the rate of flow of electrons past a given point in an electric conductor.
ANSI – American National Standards Institute.
400002-001 Rev D (September 2004) Page 1 of 22
This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.
For ease of access, the software-related terms are grouped under FAULT CODE ABBREVIATIONS.
Image | Micro-Turbine Systems Glossary of Terms and Acronyms
|Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website|
Search Engine Contact: email@example.com