Global Microturbine - Global Energy LLC


Publication Title | Microturbine :Fabrication Forefficient Power Generation

Microturbine Search Engine Series

Capstone Turbine Publications search was updated real-time via Filemaker on:

Capstone Turbine Publications | Return to Search List

Search Completed | Title | Microturbine :Fabrication Forefficient Power Generation
Original File Name Searched: Microturbine-fabrication-Forefficient-Power-Generation.pdf | Google It | Yahoo | Bing



Page Number: 001
Previous Page View | Next Page View

Text | Microturbine :Fabrication Forefficient Power Generation | 001



INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH VOLUME 3, ISSUE 6, JUNE 2014 ISSN 2277-8616

Microturbine :Fabrication Forefficient Power

Generation

Rohit Shriyan, Saurabh Sande, Aniket Dolas, Siddhant Shinde, Madan Jagtap

Abstract : We all know that in India many of the village’s still do not have electricity. But many a times it becomes difficult to transfer energy from its source/ plant up to its destination and as the distance increases cost of electricity also goes on increasing. Now to tackle this problem there are many ideas. One of those is to generate own energy from the resources available. But electricity generation can be very costly. No construction of hydro dams is necessary for such an application. As well as in hydro power plants, compact helical turbines can be used in Wind Farms instead of conventional propeller-type machines of huge diameter. So to solve these problems we are making a Microhydro turbine with less initial cost and maintainace cost. So that electricity is available to everyone also in areas where it is not able to reach. Also it` does not required much large land for its setup. The utilization of energy is an indication of the growth of a nation. For example, the per capita energy consumption in USA is 9000 KWh (Kilo Watt hour) per year, whereas the consumption in India is 1200 KWh (Kilo Watt hour). One might conclude that to be materially rich and prosperous, a human being needs to consume more and more energy. A recent survey on the energy consumption in India had published a pathetic report that 85,000 villages in India do not still have electricity. Supply of power in most part of the country is poor. Hence more research and development and commercialization of technologies are needed in this field.

1. Introduction

The energy produced by the world mainly is dependent on non-renewable energy resources. There is very less amount of energy which is acquired from the hydroelectric plants. It is because of many resons. Some of the reasons are as follows :-

Fig : World energy scenario

 High initial cost

 Requires very large lands

 Many times it is unsafe for nature and humans

 High maintainanace cost

2. Literature survey

June 2011

Capsone project report on Design and manufacture of cross flow helical turbine ByJosh Anderson, Bronwyn Hughes, Celestine Johnson. A recent survey on the energy consumption in India had published a pathetic report that 85,000 villages in India do not still have electricity. Supply of power in most part of the country is poor. Hence more research and development and commercialization of technologies are needed in this field.

3. Objective

 Manufacturing of microturbine for efficient energy generation from water flow.

• Head is not required.

• Simple design.

• Installation is easy.

 Analysis of microturbine (Comparision between the

turbines)

• Variation of efficiency and power generation with

various design considerations.

 Clean source of energy As this turbine has very much

requiementsofhead and flow rate and it is aslo efficient thus it is a clean source of energy

4. Purpose

The main purpose for selecting this project is to develop the energy with less requiremenys of heads and flow rate so that it becomes cheap and easily available.

5. Methodology

 Literature Survey

 Design of Components to be used such as Blades ,

struts , shaft , bearings and gantry to mount the turbine

by solidworks and other software.

Material selection and analysis of the above

components and correct its failure using ansys

software.

 Making of the final prototype of the project .

IJSTR©2014

www.ijstr.org

________________________

 RohitShriyan, SaurabhSande, AniketDolas, SiddhantShinde

 Department of Mechanical Engineering, Saraswati College of Engineering, Kharghar. siddhantshinde04@gmail.com, snsaurabh25@gmail.com

 Prof. MadanJagtap, Department of Mechanical Engineering, Saraswati College of Engineering, Kharghar. jagtap.aero@gmail.com

30

Image | Microturbine :Fabrication Forefficient Power Generation



microturbine-fabrication-forefficient-power-generation
Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website

Search Engine Contact: greg@globalmicroturbine.com