Global Microturbine - Global Energy LLC


Publication Title | O&I C65 ICHP UL NY REV

Microturbine Search Engine Series

Capstone Turbine Publications search was updated real-time via Filemaker on:

Capstone Turbine Publications | Return to Search List

Search Completed | Title | O&I C65 ICHP UL NY REV
Original File Name Searched: O&I_C65_ICHP_PKG_UL_NY_REV_C.pdf | Google It | Yahoo | Bing



Page Number: 001
Previous Page View | Next Page View

Text | O&I C65 ICHP UL NY REV | 001



B

WIRE SIZE

2/0 TO #6 AWG HIGH POWER 62 TO 13 mm2

NEUTRAL TO

GROUND

TORQUE

120 IN LBS

1.38 KG-M

30 IN LBS

0.34 KG-M

B

A

A

87654321

NOTICE

THIS DOCUMENT CONTAINS INFORMATION WHICH IS BOTH CONFIDENTIAL

AND PROPRIETARY TO CAPSTONE TURBINE CORP. NEITHER THIS DOCUMENT

NOR THE INFORMATION CONTAINED HEREIN SHALL BE COPIED, DISCLOSED

TO OTHERS OR USED FOR ANY PURPOSES BEYOND THE SPECIFIC PURPOSE

FOR WHICH THIS DOCUMENT WAS DELIVERED WITHOUT THE EXPRESS

WRITTEN PERMISSION OF CAPSTONE TURBINE CORPORATION.

1995 CAPSTONE TURBINE CORPORATION - ALL RIGHTS RESERVED

LTR DESCRIPTION C SEE ECO 105085

REVISIONS

DATE APPROVED

08/31/2012 P.BREAULT

NO UNLESS OTHERWISE SPECIFIED

1 INTERPRET DRAWING PER ASME Y14.100-2000

C65 INTEGRATED CHP SYSTEM EXHAUST

15 4X 1.50 IN

LIFFTING EYE

D

2 ALL DIMENSIONS ARE IN INCHES / [MILLIMETERS]

D

3 FRONT, SIDE AND REAR CLEARANCES SHOULD

BE PROVIDED FOR SERVICE ACCESS. LOCAL ELECTRICAL CODES SHALL PRESCRIBE MINIMAL REAR CLEARANCE FOR ACCESS TO JUNCTION BOX.

4 MOUNT LEVEL WITHIN 2% GRADE. SUFACE MUST

DRAIN TO PREVENT STANDING WATER.

5 REFER TO PRODUCT CATALOG FOR OPTIONAL

ACCESSORIES.

6 REFER TO CAPSTONE TURBINE FUEL

TECHNICAL REFERENCE MANUAL 410002.

7 LIFT UNIT WITH FIVE INCH WIDE FORK LIFT/PALLET JACK BLADES.

INTERFACE

DISPLAY PANEL

MICROTURBINE COMBUSTION

AIR INLET AND FILTER ACCESS

ELECTRONICS VENTILATION

AIR INLET

FORWARD PALLET 7 JACK OPENING

8 FOR OVERHEAD LIFTING OF UNIT; STRAPS MUST NOT EXCEED 30° FROM VERTICAL, ALL FOUR EYE BOLTS MUST BE USED. ORIENTATON SHOWN.

C

C

9 ADDITIONAL MICROTURBINE PRODUCT SPECIFICATION

INFORMATION IS CONTAINED IN THE C30/C60

PRODUCT INFORMATION SPECFICATION 460000.

10 ADDITIONAL MICROTURBINE ELECTRICAL

INFORMATION IS CONTAINED IN THE C60

ELECTRICAL TECHNICAL REFERENCE 410001.

11 ADDITIONAL MICROTURBINE PERFORMANCE

INFORMATION IS CONTAINED IN THE C60

PERFORMANCE TECHNICAL REFERENCE 410005.

12 ADDITIONAL iCHP PRODUCT SPECIFICATION

INFORMATION IS CONTAINED IN THE C60

INTEGRATED CHP PRODUCT INFORMATION

SPECFICATION 460025.

13 ALL DIMENSIONS ARE NOMINAL AND ARE

TO BE USED AS REFERENCE FOR BUILDING

PURPOSES ONLY, UNLESS OTHERWISE

SPECIFIED ON DRAWING.

14 LIFTING EYE ASSY, 515002-100, MAY BE LOOSENED TO EASE SIDE PANEL MOUNTING.

15 HAND TIGHTEN LIFTING EYE AND TIGHTEN

AN ADDITIONAL 3/4 TO 1 TURN TO SECURE

LIFTING EYE PARALLEL WITH LONG SIDE OF UNIT.

16 ADD RECTOR SEAL No.5 (515911-001) TO ALL PLUMBING JOINT FITTING.

17 ROOF IS A "NO STEP" ZONE.

DUAL MODE

GRID CONNECT

WEIGHTS 3000 LBS 2200 LBS

1361 KG 998 KG

ELECTRONICS AIR EXHAUST

LUG SIZES/ELECTRICAL CONNECTIONS

COPY IS UNCONTROLLED; USER IS RESPONSIBLE TO VERIFY CURRENT REVISION 87654321

SIDE PALLET

JACK OPENING

USER CONNECTION BAY (INSIDE SKIRT)

7

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES / MILLIMETERS TOLERANCES ARE:

APPROVALS

P.BREAULT

P.BREAULT ENG MGR G. TERZER COG ENG P.BREAULT

MAT ENG

THIRD ANGLE

PROJECTION

DATE

08/30/2012 08/30/2012 08/31/2012 TITLE 08/31/2012

Capstone Turbine Corporation 21211 NORDHOFF STREET

CHATSWORTH, CA 91311

O&I, C65, ICHP, HPNG INDPKG, UL,

NY

MATERIAL FINISH

SIZE

D CAGE CODE

DWG NO.

522367 VER:02 SHEET 1 OF

REV. C

3

DECIMALS .XX ±.03 .XXX ±.010

ANGLES ±.5°

DFTG CHKR

DO NOT SCALE DRAWING

FUELS

LPNG

HPNG LIQUID

PROPANE

LANDFILL

(TYPE A)

DIGESTER

(TYPE B)

FUEL INLET

1" FEMALE NPT

MODES DM GC X X

1U1M9

SCALE 1:12 DIR:10010385

Image | O&I C65 ICHP UL NY REV



oandi-c65-ichp-ul-ny-rev-
Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website

Search Engine Contact: greg@globalmicroturbine.com