Global Microturbine - Global Energy LLC


Publication Title | Oil Cooling Heat Exchanger Replacement Instructions

Microturbine Search Engine Series

Capstone Turbine Publications search was updated real-time via Filemaker on:

Capstone Turbine Publications | Return to Search List

Search Completed | Title | Oil Cooling Heat Exchanger Replacement Instructions
Original File Name Searched: Oil Cooling Heat Exchanger Replacement Instructions.pdf | Google It | Yahoo | Bing



Page Number: 001
Previous Page View | Next Page View

Text | Oil Cooling Heat Exchanger Replacement Instructions | 001



Application Engineering Bulletin From: Copeland Customer Service

Subject: Oil Cooling Heat Exchanger Replacement Instructions

Be sure to read and comply with the instructions contained within this Application

Engineering Bulletin prior to installing the Oil Cooling Heat Exchanger.

CAUTION: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. For assistance or additional

information, consult a qualified installer, service agency or the gas supplier. This system must be installed and used in accordance with manufacturer’s instructions and local codes.

WARNING: Service must be performed by qualified personnel only. Failure to follow these safety warnings could result in serious injury or death.

EXPLOSION AND ELECTRICAL SHOCK HAZARD

Designed for use with U.S. Pipeline Quality Natural Gas or Methane. NOT TO BE USED WITH REFRIGERANTS. Before servicing, relieve all internal pressure. Purge or evacuate the system per Owner’s Manual. Use this equipment in a grounded system only. Wear protective goggles. System applicable wiring diagram. Replace all covers and guards, if applicable, before applying power.

CAUTION: Prior to servicing any electrical components, verify that the high voltage DC bus is zero. System capacitors may remain charged for up to ten

minutes after shutdown. Use only lubricants and electrical components approved by the manufacturer: use of other materials is dangerous and could cause fires, explosions or electrical shorting.

Introduction:

Form No. 2001-34 R1 Page 1 of 5 Issued 4/14/03

Emerson Network power is a trademark and a service mark of Emerson Electric Co. Copeland is a registered trademark of Copeland Corporation. 2001 Copeland Corporation.

Image | Oil Cooling Heat Exchanger Replacement Instructions



oil-cooling-heat-exchanger-replacement-instructions
Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website

Search Engine Contact: greg@globalmicroturbine.com