Global Microturbine - Global Energy LLC


Publication Title | Overview SERIES 17000 FAULT CODES Integrated CHP Faults

Microturbine Search Engine Series

Capstone Turbine Publications search was updated real-time via Filemaker on:

Capstone Turbine Publications | Return to Search List

Search Completed | Title | Overview SERIES 17000 FAULT CODES Integrated CHP Faults
Original File Name Searched: C60_14_17000 Faults.pdf | Google It | Yahoo | Bing



Page Number: 001
Previous Page View | Next Page View

Text | Overview SERIES 17000 FAULT CODES Integrated CHP Faults | 001



Overview

SERIES 17000 FAULT CODES Integrated CHP Faults

Series 17000 fault codes relate to the Integrated Combined Heat and Power (CHP) systems. The following table shows the fault number, fault description, system severity level (SSL) for the system, system severity level (SSL) for CHP, and isolation message for each fault. The troubleshooting procedure for each message follows the table.

There are two fault priorities in CHP systems - how it effects the C60 System and how it effects the

CHP Module. As shown in the table below, a SSL-3 or higher will cause the MicroTurbine to either stop or prevent from starting. This is required in some cases where we are not able to control or monitor the temperature in the heat exchanger.

For SSL-2, a Warning is generated which can be monitored by the CRMS, but the system continues to generate power. In some cases the system will generate a SSL-2 (Warning), however, the CHP module will remain in Full Bypass to prevent water heating. This is further broken down into two categories as shown below: FR, which requires a “full system shutdown and restart” to clear (should involve maintenance inspection), and FW, which can be cleared automatically if the condition changes (water starts flowing).

CHP Error Category

Action

FR

CHP Down - must shut down, go to standby, and restart to clear fault (see Note below).

FW

CHP Down - may run automatically when fault clears.

WN

CHP Run - may require further attention.

NOTE

Some FR faults will also cause SSL-3 which prevents the MicroTurbine from running.

Fault No

Fault Description

SSL - System

SSL - CHP

Isolation Message

17000

CHP COMM TO

3

FR

Internal Fault

17001

CHP CONFIG ERR

3

FR

Internal Fault

17002

CHP SLFTST FAIL

3

FR

Internal Warning

17003

CHP NO AUX IN

2

FW

Internal Warning

17004

CHP CORE OTMP

3

FR

Internal Fault

17005

CHP NO FLOW

2

FW

Internal Warning

17006

CHP MTR OC REC

2

FW

Internal Warning

17007

CHP MTR OC BYP

3

FR

Internal Warning

17008

CHP MTR UC REC

2

FW

Internal Warning

17009

CHP MTR UC BYP

3

FR

Internal Fault

17010

CHP TIN OP SH

2

FW

Internal Warning

Continued on next page

Observe Safety Precautions - Refer to Safety Instructions for Details

430013-001 Rev C (July 2003) 14-1 Model C60 Troubleshooting Guide

This information is proprietary to Capstone Turbine Corporation. Neither this document nor the information contained herein shall be copied, disclosed to others, or used for any purposes other than the specific purpose for which this document was delivered. Capstone reserves the right to change or modify without notice, the design, the product specifications, and/or the contents of this document without incurring any obligation either with respect to equipment previously sold or in the process of construction.

Image | Overview SERIES 17000 FAULT CODES Integrated CHP Faults



overview-series-17000-fault-codes-integrated-chp-faults
Capstone Turbine For Sale - Microturbine C30 C65 C200 C600 C800 C1000 - Go to microturbine website

Search Engine Contact: greg@globalmicroturbine.com